Toilet Accessories, Urinals, and Lavatories

Multiple-Accommodation Toilet Room Layout

Multiple-accommodation toilet rooms must provide adequate clear space for maneuvering and turning:

FLOOR PLAN REQUIREMENTS:

- 60" min. overall width
- 60" min. depth
- 60" min. diameter clear turning space
- 30" x 48" clear space at fixtures
- 24" min. grab bar spacing
- 36" min. grab bar length
- 42" min. grab bar length
- 34" min. clear aisle width
- 32" min. clear entrance width
- 44" min. clear space depth
- Flush activator on wide side
- 60" x 60" level and clear entry area

Toilet Accessories Mounting

All toilet accessories must be mounted at a maximum height of 40" above the finished floor:

Accessories (mounted at max. 40" height):

TOWELS & NAPKINS dispenser
WASTE receptacle
TOWELS dispenser
DRYER
SANITARY NAPKIN dispenser
CUPS dispenser

This diagram illustrates the specific requirements of these regulations and is intended only as an aid for building design and construction.

Urinals

Specification	Requirement
Side clearance from wall	14" min.
Required clear space	48" min. depth x 30" width
Clear width in front of fixture	30"

Lavatories

Side Elevation Requirements

Element	Specification
Knee clearance	8" min. at 27" min. height
Toe clearance extension	6" max.
Depth under lavatory	17" min.
Rim height	29" min. to 34" max.

Plan View Requirements

Element	Specification
Width	30" min.
Depth	19" max.
Clear floor space depth	48" min.
Clear depth under fixture	17" min.
Distance to centerline from wall	18" min.

Note: If a minimum 9 inches height of toe clearance is provided, a maximum of 6 inches of the 48 inches of clear floor space required at the fixture may extend into the toe space.

This diagram illustrates the specific requirements of these regulations and is intended only as an aid for building design and construction.

For additional information on accessible design requirements, see Understanding ADA Compliance.